ARTISTCLONER CABLE RISERS

Google translate en Français ICI
CUSTOM STAINLESS STEEL SUPPORT RODS    -    BIG NATURAL WOOD BLOCKS    -   PEWTER CUSTOM EMBLEM
HIGH EFFICIENCY ABSORPTION FEET   -   WOOD INSERTS   -   HIGH QUALITY INDUSTRIAL SUPPORTING RUBBER BANDS

cABLE RISERS...WHY?


High end systems, just like precision instruments, are fragile to vibrations which includes the cables used in these audio systems. Mechanical vibrations and shock have an impact on the playback of a system. Raising the cables off the floor this gives the advantage of lowering the capacitance between cable and floor. These risers have stainless steel pins that are non magnetic as to not interfere with the magnetism of the cables it is supporting.

The wood blocks are of a solid hardwood type (four wood types are available) and include non-magnetic metal inserts for the stainless steel support rods. The non-magnetic insert provides a solid link for the pins to the wood blocks and the threads won't wear with use.

These TO HEAVEN risers also sport special high absorption feet to further dampen the vibrations by converting it into heat. The HIGH QUALITY SUPPORTING RUBBER BANDS further isolate the cables for the quietest signal transmission ever. To enhance the visual qualities there is a custom hand made PEWTER medal ARTISTCLONER logo inserted into the wood.  Made in Canada.

Here is a link explaining how these work - positive-feedback.com/audio-discourse/bunking-cable-lifters/

Available in quantities of 6 or 10

MAHOGANY
Click pictures to expand
CHERRY WOOD
Click pictures to expand
WALNUT
Click pictures to expand
MAPLE AMBROSIA
Click pictures to expand

features

  • NON-MAGNETIC CONSTRUCTION
  • INDUSTRIAL RUBBER SUPPORT BANDS
  • STAINLESS STEEL SUPPORT RODS WITH MULTIPLE GROOVES
  • METAL INSERTS FOR SUPPORT RODS
  • SOLID HARDWOOD BLOCKS (4 1/2" LENGTH X 2 1/2" DEPTH X 1 13/16" HIGH WITH FEET not including pin length 2" more in height) 
  • SPECIAL ISOLATION FEET THAT CONVERT VIBRATION TO HEAT
  • HIGH QUALITY ITALIAN WOOD FINISH
  • EXTRA INDUSTRIAL RUBBER BANDS WITH EACH SET (+6 FOR THE SIX AND +10 FOR THE TEN)
  • MULTIPLE WAYS TO SUPPORT CABLES
  • IMPRESSIVE LOOK

HOW TO <<TO HEAVEN>> CABLE RISERS

HOW MANY ARE NEEDED?
This depends on two factors:
  1. The length of your cable to be supported
  2. The stiffness of the cable
These two factors and how you system is set up will determine the quantities needed to properly support the cables. In general 6 supports work well for cables up to 8-10 feet. 10-15 feet the TEN units are better suited for this purpose. Options: You could purchase the TEN and use 6 for speaker cables and use the 4 left over for the A/C cables if this works for your setup.

POSSIBLE WAYS OF USING THE RISER
Click pictures to expand
 150$ per riser +TX
Sold in quantities of 6 or 10 (inquire for other quantities)
For purchase, quote or info: info@artistcloner.com

You get extra industrial bands with your purchase!
  • 6 extra bands for the SIX pack (18 in total)
  • 10 extra bands for the TEN pack (30 in total)

Pin groove distancing