The ArtistClonerSOLITZspeaker cable is unique in its fabrication and use of high quality materials. Named the SOLITZ as this is a hybrid of a high count, 49 strands Litz cable combined with one solid core *6N-OCC 99.9999% pure copper wire. Solid + Litz = SOLITZ! Litz wire has many strands of wire thinly isolated from each other by a type of enamel protecting the wires and increasing the surface conduction area. The thin isolation between strands makes this cable look small for its size but don't be fooled as this is a huge cable conductor that is not puffed up with thick isolation dielectrics. The audio qualities of Litz cables are well documented for audio use and are considered the holy grail in many circles for speaker cables. The total AWG size of the cable is equivalent to an #8AWG allowing this cable an amperage capacity of well over 40 amps!
SOLITZ Speaker cables have the right balance of frequency extension, mid-range expressiveness and pace. The resolution and details are presented in a smooth fashion and keeps listening fatigue low. The depth, width and height are rendered with a stunning realism with imaging that is very precise and properly located. The high amperage capacity lets the music flow with little interference in dynamics and efficiency at all frequencies. There is no design cousin in the industry making this cable unique in construction and in sonic performance.
Hybrid LITZ and a solid core *6N-OCC copper wire (99.9999% pure)
Very large gauge of cable for high current capability
Arrow marked for easy recognition of direction flow
ArtistCloner Proprietary SOLITZ Speaker cable is in a class of its own
High resolution & transparency
High quality carbon color sheathing
Minimum use of insulation as to reduce magnetic field transmission line anomalies
Comes in varied lengths; 1.8m, 2.4M, 3M and custom
49 strands of LITZ wire (solid core >99.99% high purity annealed copper)
One Solid core *6N-OCC 99.9999% pure copper in a Teflon tubing (Teflon is considered the holy grail in isolation properties)
Very low D/C resistance 0.036ohm for a 20 feet cable both pos and neg connected in series (Value is half if one polarity is used for measurement 0.018ohm)
High current capacity - over 40 amps
Very low skin effect losses
ESR (AC resistance) in ohms@1K is 0.043ohms
Extra high quality copper with a conductivity of 101.5% or better
Ultra low inductance
Ultra low eddy currents
Controlled proximity effect between conductors
See measurements below
This speaker cable has low reactance and as such makes a more direct link between amplifier and the speaker. The improvement is dramatic and very musically engaging. One of the best speaker cables around!
Starts at 699.00$ - Price subject to change without notice -
LITZ and OCC 99.9999% solid core copper
Speaker terminal Jumpers
Jumpers to replace your brass straps that usually come with speakers that can either be bi-amplified or bi-wired. Brass is not a very good sounding metal and by changing to high quality jumpers your speakers sound more like music. About 15 inches long, Solitz design, Cardas spades and silver soldered. Price: 275.00$
Solitz speaker cable measured performance
Hear are some tough tests to get by as we short one end of the cable and send a signal through both negative and positive wires to get our results. This shows a more true real world performance of a cable and most manufactures don't like to test them this way as is it makes the measurements worse. Even though we test our cables this way our results are nothing short of amazing! All measured specifications are for a 20 foot ArtistCloner SOLITZ speaker cable with one end shorted. Termination is with Cardas Rhodium spades.
DC resistance 0.036ohm for both connected in series or 0.018ohms for one (neg or pos)
Impedance 5Hz@0.05ohm and 20kHz@0.28ohm
Capacitance is less than 0.002mF at 1kHz
Electrical Series Resistance in ohms@100kHz is 0.043ohms
Quality factor at 1kHz is 0.04%
Inductance too low to measure
See charts below. Specifications subject to change without notice.
20 feet Solitz speaker cable impedance VS frequency
*6N-OCC COPPER (99.9999%)-used in most top of the line cable products, 6N-OCC provides the best quality copper. OCC (Ohno Continuous Cast) is the name given to the casting process developed to help defeat annealing issues and virtually eliminate all grain boundaries in copper or silver with a unique patented process. The OCC casting method stretches single copper crystal to a whopping 125 meters in length. Stretching the crystal makes for a much smoother path for the electrons to travel. An analogy of the difference between the non-OCC copper and the OCC 99.9999% copper is like driving a car on a repaired asphalt road with cracks (non-OCC copper) and a brand new road (OCC 99.9999% copper).