ArtistCloner SCORPI integrated amplifier
If you can't bring the artist home, clone the performance! 
​ARTISTCLONER, cloning audio experiences!
The SCORPI has arrived! This integrated amplifier is a must for the music lover, musician or audiophile. The exceptional audio performance has been achieved with new grounding techniques, attention to the details and using special conductors for the audio signal transportation from input to output. The musical performance is 3D, holographic and eerily real sounding. This is goosebumps territory that will have your friends spilling their drinks in awe. Want to have fun? Wait no more!  (Show reviews here)
Features
  • 8 year warranty / 3 years on moving parts (see warranty)
  • High current  (output devices capable of 22 amps per channel)
  • DC coupled (no capacitor in signal path from input to output)
  • Engraved lettering
  • Music signal travels through small parts count and short paths from input to output 
  • Absolutely no series capacitor in the signal path!
  • Output: Cardas CCGR S speaker binding posts
  • Brand name and boutique parts used
  • 105° electrolytic capacitors (built to last)
  • Cardas silver solder in audio path 
  • ​Virtually indestructible: protection includes; shorting of the speaker outputs, over voltage, overheating and DC output shut off
  • Auto mute on power up and power down
  • High Quality: metal remote control for motorized volume and input selection
  • Ground loop defeat technology
  • Remote controlled input selection and volume
  • Hand soldered and assembled in CANADA with passion!
Specifications
  • 50 watts RMS@8 ohms 100watts RMS@4 ohms 150watts RMS @2 ohms
  • Well over 110 watts of music peaks at 8 ohms!
  • Input: Class A, JFET transistors fully biased in class A (mimics tubes without the upkeep)
  • Output: Class A-AB
  • Frequency response 0hz to 170Khz -3db
  • Noise floor better than 2.0μV
  • Intermodulation distortion 0.005%
  • THD and noise typically better than 0.05%
  • Signal to noise ratio at rated output typically 112dB<
  • DC coupled with DC protection circuit (will prevent speaker destruction if ever there is a DC fault in any component before the amplifier and /or the amplifier itself)
  • 512VA Custom made for ArtistCloner banded with static shield power toroidal transformer
  • *6N-OCC 99.9999% pure copper for audio paths
  • Input: 3x single ended pairs
  • 1/2 inch thick front and back plates
  • Nickel plated casing
  • Approx weight 32.5lbs (non ship weight)
  • Approx. size (w)18 1/4 x (D)14 1/4 x (H)4 3/4
  • 8 year warranty - 3 years on moving parts
Quality before quantity to get the perfect emotional audio experience. Oversized transformer, custom made for ArtistCloner  with static shield to achieve the ultimate dynamic reserves, effortless musicality and low noise. Hard wired, silver soldered, 6N-OCC wire, Teflon insulated audio paths for the purist signal transmission from input to output (90% of the audio signal is carried by wires and not pc board traces). A/C wires and audio carrying circuits are painstakingly separated as to not have magnetic fields coupling/interference. This amplifier is DC coupled for maximum bass extension and minimal phase shift contributes to a more coherent sound. Precision machined, nickel plated, thick aluminum casing that looks as good as a high end luxury car. This amplifier is built like a tank to last as it incorporates protection circuits and is over built for the task at hand. A true masterpiece to be enjoyed for its mesmerizing audio capabilities and its looks.
How did we come up with the name SCORPI? It is derived from the name Scorpion which is a small creature that has a reputation that commands respect.
Starts at 10999$
(add 926$ for nickel plate)
- Price subject to change without notice -

    Info form or call 438-338-0218
Allow the break-in before final evaluation:  Break-in time: 75 hours (60%), 200 hours (90%), 500+ hours (99%)
When ordering
If not in stock; be aware that the delivery time for your Artistcloner SCORPI amplifier is approximately 45-60 days. No cold hearted robot is assembling this amplifier. There are typically 52 man hours in North America plus delivery times for parts to create this superb amplifier. We stress test the amplifier for 75 hours and remeasure its performance. We will communicate with you (e-mail) at every stage of its creation until the amplifier is delivered to you. The 8 year warranty is date of manufacture.
*6N-OCC COPPER (99.9999%)-used in most top of the line cable products,  6N-OCC provides the superior quality copper. OCC (Ohno Continuous Cast) is the name given to the casting process developed to help defeat annealing issues and virtually eliminate all grain boundaries in copper or silver with a unique patented process. The OCC casting method  stretches single copper crystal to a whopping 125 meters in length. Stretching the crystal makes for a much smoother path for the electrons to travel. The difference between the non OCC copper and the OCC 99.9999% copper is like driving a car on a repaired asphalt road with cracks (non-OCC copper)  and a brand new road (OCC 99.9999% copper).